<< Click to Display Table of Contents >> Navigation:  LCR.iQ Product Manual > Setup and Operation > Operating the Register > Performing a basic delivery

Simple and easy. That was the goal when designing the operation of the Register. Making a delivery with the Register can be as simple and easy as pressing the yellow Start key.  

 

When you're ready to begin a basic delivery, press the Start key. The register will start the reset process by completing a display test, then will reset to zero.  At this time if the Register is connected to a flow control valve, the register will send a signal to open the valve and possibly signal a pump to start . With the pump on, fuel will be begin to flow through the meter and register on the display. The main delivery screen of the Register will always default to the active fueling screen with large, high resolution digits.  

 

While a delivery is active, it is possible to view detailed delivery information by pressing the Show Details button. The detailed information displayed is configurable depending on the profile which can be configured on any register. A separate how to instruction on setting up a profile is available.  

 

To return to the default fueling screen, simply press the Full Screen button and the default delivery screen will now be displayed.  

 

At any time during the delivery, pressing the Stop key will pause the delivery by sending a signal to the flow control valve (if installed) to close. You'll also see that the display now has a Resume key.  

 

Pressing the Resume key will resume the delivery after it is stopped by sending a signal to the flow control valve to open.

 

To end a delivery, pressing the End or End and Print button will complete the transaction. If a printer is connected, this will also print the delivery ticket.

 

Once the delivery is complete, the display will return to the Idle home screen and the Register is ready for the next delivery.